With horizontal pleat structure, MHFB Series High Flow Pleated Filter Cartridge is highly efficiency, outside to inside flow direction liquid filtration. It's designed for applications with high contaminant removal requirement. The filter has a big diameter of 6.5inch/165mm, horizontal pleated depth media cartridge design permits higher flow rates than standard 2.5''diameter filter cartridges resulting in significantly fewer required filter cartridges for a given flow.
Features |
Available in Nominal structure, particle removal rating from 0.5 to 100 Micron Horizontal pleat, high filtration area, high flow rate Fixed fiber matrix with no adhesives or surfactants, the filter has consistent filtrate quality, highly stable structure, high dirt holding capacity 100% polypropylene components provide broad chemical compatibility , suitable for use in a variety of fluids Fewer cartridges required , reducing handling cost The long service life results in low investment and less manpower in many applications Meets FDA requirements for food contact |
Applications |
Food & Beverage Process Water(Pre-RO,cooling…) Ground/Reclaimed/Wastewater Sea water desalination Oil&Chemical Power plant water treatment Machinery&Equipment Chemicals Refing(Amine, Final product) Machine coolants |
Dimensions |
Outer Diameter | 165mm |
Length | 40” , 60 ” |
Material of Constructions |
Media | PP |
Cage / Core / End Cap | PP |
Sealing | Silicone, EPDM, Viton®, E-FKM |
Performance |
Max. Operating temperature | 80℃ |
Max. Operating DP | 3 bar@ 21℃ |
Recommended Change out Differential Pressure | 2.4Bar, 20°C |
Food Contact Compliance |
Material of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations 21CFR. Materials used to produce filter media and hardware meets the specifications for biological safety per USP Calss VI-121C for plastics. Filter cartridges passed European Commission Directives (EU10/2011) |
Flow Rate |
|
Dimensions |
|
Ordering Information |
|