BGE Series are all-polypropylene filter cartridges in economically efficient design, suitable for a wide range of process applications. The pleated polypropylene filter material provides a large filtration surface area which allows for maximized flow rate in the system. PP Pleated Filter Cartridges are available in nominal retention ratings from 0.1 to 50 micron.
Features |
Nominal rated structure, particle removal rating from 0.1 to 50 Micron 100%polypropylene components provide broad chemical compatibility, suitable for use in a variety of fluids Various end cap configurations to fit into the most standaed housings Meets FDA requirements for food contact and passes European Commission Directives (EU10/2011) |
Applications |
Food & Beverage Plating Chemicals RO Pre-Filtration Fine Chemicals Process Water Wastewater |
Dimension |
| OD： | 69mm |
| Length： | 5” , 10” , 20” , 30”,40 ” |
Material of Constructions |
| Media： | PP |
| Support： | PP |
| Cage / Core / End cap： | PP |
| Sealing： | Silicone EPDM NBR Viton Teflon E-FKM |
Performance |
| Max. Operating temperature： | 80℃ |
| Max. Operating DP： | 4 bar@ 21℃ , 2.4 bar@ 80℃ |
 |
| Particle Removal Ratings (μm) |
| Cartridge Designation | 85% Efficiency | 95% Efficiency |
| BGE0010 | 0.1 | —— |
| BGE0022 | 0.22 | —— |
| BGE0045 | 0.45 | —— |
| BGE0065 | 0.65 | —— |
| BGE0100 | 1 | —— |
| BGE0300 | 3 | —— |
| BGE0500 | 5 | —— |
| BGE1000 | 10 | —— |
| BGE2000 | 20 | —— |
| BGE5000 | 50 | —— |
Food Contact Compliance |
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations 21CFR. Materials used to produce filter media and hardware meet the specifications for biological safety per USP Calss VI-121C for plastics. Filter cartridges passed European Commission Directives (EU10/2011) Halal Certified |
Ordering Information |
 |
